Timecode Systems :pulse
Supported FPS modes 23.976, 24, 25, 29.97, 30, 29.97DF, 30DF
T/C input LEMO 5 connector
Wired connectivity Ethernet, USB, UART, RS232, RS422, LANC
Frequency 865MHz-923MHz, Worldwide ISM bands. 2.4GHz 802.11g Wi-Fi
Power Backup Li-Polymer rechargeable battery with 3-4 hours min operation, 5V micro USB connector, LEMO2 9-36V DC
T/C outputs Three Buffered outputs on BNC, LEMO 5 and separate LEMO 9 connectors. Selectable MIC or LINE output level on LEMO5
Output sync modes PAL, NTSC, 720p, 720p double frame, 1080i, 1080p, 1080p double frame, Word Clock 44.1, 48.2, 48, 96, 192 KHz
Output video sync 1V pp / 75 ohm or 1V pp /37.5ohm for ‘High Level Genlock’ mode (3D camera rigs)

Included

1x Timecode Systems :pulse Multifunctional Timecode & Metadata Hub & Device Control Center
1x USB Cable
1x Power Adapter

Description

Timecode Systems :pulse Multifunctional Timecode & Metadata Hub & Device Control Center

The :pulse from Timecode Systems is a multifunctional timecode and metadata hub and device control center designed for multicamera setups that allow you to view, monitor, and control any B:LINK-enabled device and compatible camera or audio device from a smartphone, tablet, or computer. It can be used to provide a zero-drift timecode and genlock sync for video and film applications.

The large-capacity LiPo internal battery is constantly charged from any of the power inputs and will run the unit for a minimum of 3 to 4 hours with RF, Wi-Fi, and Ethernet switched on. It is suitable for camera battery swaps or location moves.

Additionally, the :pulse has a solid aluminum casing and features a high-resolution blue OLED display. It offers flexible mounting methods and multiple powering options and can be configured as either an RF slave device or a master device.

The Mini Base Station

Add the mini base station to your multicamera setup and experience the full benefits of the B:LINK protocol. Monitor and control any B:LINK-enabled device or compatible camera and audio devices from your smartphone, tablet, or computer, all while providing accurate zero drift timecode and genlock for your production

User-Friendly Features

The :pulse also has a solid aluminum casing and features a high-resolution blue OLED display, flexible mounting methods, and multiple powering options. It has UART, RS-232/RS-422 connectivity, Ethernet/Wi-Fi/USB connectivity, and simultaneous long-range RF sync and B:LINK networking features

Zero Drift Between Units

Configured as an RF slave device, the :pulse’s timecode and sync generator is soft-jammed twice a second via the long-range robust ISM band RF, meaning zero drift between units. The B:LINK network allows the :pulse to either operate as a B:LINK master device or a B:LINK slave device

Downloads

Related

Aputure LS 600c
Cvolution knob solo
Blackmagic ATEM 2 M/E Constellation HD

Find out how we can help your production. Contact us

Ground Floor, Battersea Studios
82 Silverthorne Road, London, Sw8 3HE

© Verve. 2021. All rights reserved. Privacy. Terms